Employee in PPE moving chemical drum

Common hazardous substances and safety equipment requirements

 

Every year, thousands of workers are injured or suffer ill effects due to hazardous substances. Employers are responsible for taking effective measures to control exposure to these substances and to ensure proper procedures are in place in the event of a spill or splash.

There is a wide range of chemicals that can be hazardous to workers health. If a substance is harmful, they will be clearly labelled with the relevant hazard symbol(s). Common materials in everyday use such as paint, bleach, solvent, or fillers are all considered hazardous.

Chemical suppliers must provide a safety data sheet which can help users understand how to control the hazardous substance and prepare for any spills or splashes. The information contained in a safety data sheet should be in a user-friendly 16-section format and include: properties of the chemical (including recommended use and any restrictions on use) the physical, health, and environmental health hazards, protective measures, and safety precautions for storing, handling and transporting the chemical.

They also include a section displaying the safety pictograms for the substance, for example;

hazard pictograms

Always ensure you read the full safety data sheet carefully and follow the recommendations within. It should not replace the need for a risk assessment and should only be used to guide your own thorough evaluation.

Hughes supply to numerous industries, here we’ve outlined some of the most common hazardous substances they encounter. It is clear to see why safety showers and/or eye washes are a necessity in these environments.

hazardous substances table

Standard considerations

In the chemical SDS, under first aid in the event of a spill or splash, it may mention flushing with a 'large amount of water'. Some may specify an amount of time, usually 15 minutes. European and international standards do recommend the full 15 minutes of flushing to ensure a full decontamination.

Both EN15154 and ANSI/ISEA Z358.1-2014 provide uniform minimum requirements for the performance, use, installation, testing, maintenance and training of emergency safety shower and eyewash equipment.

As hazardous chemicals can be used in a variety of locations across sites, it's important to be aware of the requirement from EN and ANSI standards that safety showers must be placed within 10 seconds reach (or 15 metres) of a hazard to minimise injury.

Take a look at our standards summary documents for an easy to digest run-down of the main recommendations.

Which safety showers or eye/face wash units suit your site?

  • Emergency tank showers are the simplest solution for meeting standards as they can provide water at the correct pressure and temperature even in remote locations. Immersion heated tank showers maintain the water at a tepid temperature in cold climates. For hot climates, cooling systems can be fitted so the water doesn’t heat up from the solar radiation.
  • Freeze protected safety showers are designed for locations with low ambient temperatures to prevent the water in the safety shower from freezing rendering it inoperable in the event of an emergency and damaging the unit.
  • Temperature controlled safety showers have an integral heated water tank for areas where there is no access to hot water. They can also be used as a warm water source to feed other emergency shower units in the local vicinity.
  • Self-draining safety showers are an alternative solution for hot climates. The standing water in the self-draining showers is allowed to drain away from the standpipe to ensure it doesn’t heat up in the sun.
  • Eye/face wash units should be placed where there is a high risk of splashes of chemicals resulting in eye injuries. They can also be used in conjunction with nearby safety showers to allow varied decontamination depending on the situation.

Don’t forget, if you run a workplace where harmful materials are, the law requires you to control the use of those chemicals. Ensure you assessed the risks in the storage, handling and implementation of the substances so that you can apply and maintain effective control measures.

For advice on the most suitable solution for your application or to request a quote, contact us today.

Share:

How can we help?

Chat with us

Chat live to our helpdesk
from 9am-5pm.

Live chat

Send a message

Email your enquiry and
we'll get back to you.

Contact us
© Hughes Safety Showers 2021. All Rights Reserved.
457 Campbell Street, Sarnia, Ontario N7T 2J1 Canada